Silver Green quartzite

Silver Green quartzite is quarried in Hebei province.

Stone Tile

Sawn Tile

Honed/Matt

Thermal/Flamed

Stone Sealer

Stone sealing is highly recommended for quartzite stone applications. Here is a reference video on this topic.

Cube Stone Paver

Cube Stone Itself

Quartz-based cube stone pavers are normally done with a flamed top and a sawn bottom. Every edge of the stone is saw-cut at lower part, chopped at the upper part, so that broken-edge effect is seen from the top.

Stone Cladding

Stone Panel

Split Finish Panel & Corner

Panel

Corner/Quoin

For thin panel corner/quoin solution, we normally make a pair of 2 corner pieces, a 400mm long piece and a 200mm short piece. The two pieces can interlock and be setup as an exposed corner set easily at the construction site.

MNL stone panel

The more-natural-look (MNL) stone cladding panel is a pre-fabricated masonry unit. This modularized innovative stone system saves both time and money compared with traditional stone masonry. The MNL stone cladding modular consists both panels (or flats) and quoins (or external corners). The edges of all stones are hand-dressed so that it has a very natural appearance. Quoins are mostly done with actual stone-itself-cut stone pieces.

- What is a full concrete back system?

In a full concrete backing system, concrete (cement) at the panel back is actually the "glue" to freeze each piece of stone in its position. The stone pieces are arranged and attached to a fiber mesh back or a metal wire net. They are placed within a frame, poured with a 10mm layer of concrete at the backside. After a well-controlled solidification time, the panel finally reaches the highest strength hardness making it durable even in the coldest areas such as north European countries.

Full Concrete Back Flat

Standard Size

- Why larger size panel?

Compared with 150mm high panel, the 200mm high allows us to use larger/higher pieces of stone. We feel that the 550x200mm panel looks more close to nature.

Custom Size

The following panels are custom-made in 3 typical dimensions and named Type A, B and C. All 3 sizes of panel can be arranged at the construction site full of variety to reach out an appealing effect

In the mean time, Type B & C can be used to build corner/quoins as well.

• Type A @ 547x215x30-45mm
• Type B @ 347x215x30-45mm
• Type C @ 200x215x30-45mm

Full Concrete Back Corner/Quoin

Type A: L Shape Fixed Corner

Quoin is an external angle of a wall. For the MNL series of stone panels, the regular size for quoin is L(200+300) x H200. The thickness is up to 40 mm from the back of the stone to the surface. The stone quoin we manufacture uses large-size actual-itself-cut stone, dressed and arranged so as to form a decorative contrast with the adjoining wall panels.